Supported Devices

General support matrix

_ EOS Junos IOS-XR (NETCONF) IOS-XR (XML-Agent) NX-OS NX-OS SSH IOS
Driver Name eos junos iosxr_netconf iosxr nxos nxos_ssh ios
Structured data Yes Yes Yes No Yes No No
Minimum version 4.15.0F 12.1 7.0 5.1.0 6.1 [1] 6.3.2 12.4(20)T
Backend library pyeapi junos-eznc ncclient pyIOSXR pynxos netmiko netmiko
Caveats EOS   IOS-XR (NETCONF)   NXOS NXOS IOS
[1]NX-API support on the Nexus 5k, 6k and 7k families was introduced in version 7.2

Warning

Please, make sure you understand the caveats for your particular platforms before using the library.

Configuration support matrix

_ EOS Junos IOS-XR (NETCONF) IOS-XR (XML-Agent) NX-OS IOS
Config. replace Yes Yes Yes Yes Yes Yes
Config. merge Yes Yes Yes Yes Yes Yes
Commit Confirm Yes Yes No No No Yes
Compare config Yes Yes Yes Yes [2] Yes [4] Yes
Atomic Changes Yes Yes Yes Yes Yes/No [5] Yes/No [5]
Rollback Yes [3] Yes Yes Yes Yes/No [5] Yes
[2]Hand-crafted by the API as the device doesn’t support the feature.
[3]Not supported but emulated. Check caveats.
[4]For merges, the diff is very simplistic. See caveats.
[5](1, 2, 3) No for merges. See caveats.
[6]NAPALM requires Junos OS >= 14.1 for commit-confirm functionality.

Warning

Before building a workflow to deploy configuration it is important you understand what the table above means; what are atomic changes and which devices support it, what does replacing or merging configuration mean, etc. The key to success is to test your workflow and to try to break things on a lab first.

Getters support matrix

Note

The following table is built automatically. Every time there is a release of a supported driver a built is triggered. The result of the tests are aggregated on the following table.

EOSIOSIOSXRIOSXR_NETCONFJUNOSNXOSNXOS_SSH
get_arp_table
get_bgp_config
get_bgp_neighbors
get_bgp_neighbors_detail
get_config
get_environment
get_facts
get_firewall_policies
get_interfaces
get_interfaces_counters
get_interfaces_ip
get_ipv6_neighbors_table
get_lldp_neighbors
get_lldp_neighbors_detail
get_mac_address_table
get_network_instances
get_ntp_peers
get_ntp_servers
get_ntp_stats
get_optics
get_probes_config
get_probes_results
get_route_to
get_snmp_information
get_users
get_vlans
is_alive
ping
traceroute
  • ✅ - supported
  • ❌ - not supported
  • ☠ - broken

Other methods

_ EOS Junos IOS-XR (NETCONF) IOS-XR NX-OS IOS
load_template
ping
traceroute

Available configuration templates

  • set_hostname (JunOS, IOS-XR, IOS) - Configures the hostname of the device.
  • set_ntp_peers (JunOS, IOS-XR, EOS, NXOS, IOS) - Configures NTP peers of the device.
  • delete_ntp_peers (JunOS, IOS-XR, EOS, NXOS, IOS): Removes NTP peers from device’s configuration.
  • set_probes (JunOS, IOS-XR): Configures RPM/SLA probes.
  • schedule_probes (IOS-XR): On Cisco devices, after defining the SLA probes, it is mandatory to schedule them. Defined also for JunOS as empty template, for consistency reasons.
  • delete_probes (JunOS, IOS-XR): Removes RPM/SLA probes.

Optional arguments

NAPALM supports passing certain optional arguments to some drivers. To do that you have to pass a dictionary via the optional_args parameter when creating the object:

>>> from napalm import get_network_driver
>>> driver = get_network_driver('eos')
>>> optional_args = {'my_optional_arg1': 'my_value1', 'my_optional_arg2': 'my_value2'}
>>> device = driver('192.168.76.10', 'dbarroso', 'this_is_not_a_secure_password', optional_args=optional_args)
>>> device.open()

List of supported optional arguments

  • allow_agent (ios, iosxr, nxos_ssh) - Paramiko argument, enable connecting to the SSH agent (default: False).
  • alt_host_keys (ios, iosxr, nxos_ssh) - If True, host keys will be loaded from the file specified in alt_key_file.
  • alt_key_file (ios, iosxr, nxos_ssh) - SSH host key file to use (if alt_host_keys is True).
  • auto_probe (junos) - A timeout in seconds, for which to probe the device. Probing determines if the device accepts remote connections. If auto_probe is set to 0, no probing will be done. (default: 0).
  • auto_rollback_on_error (ios) - Disable automatic rollback (certain versions of IOS support configure replace, but not rollback on error) (default: True).
  • config_lock (iosxr_netconf, iosxr, junos) - Lock the config during open() (default: False).
  • lock_disable (junos) - Disable all configuration locking for management by an external system (default: False).
  • config_private (junos) - Configure private, no DB locking (default: False).
  • canonical_int (ios) - Convert operational interface’s returned name to canonical name (fully expanded name) (default: False).
  • dest_file_system (ios) - Destination file system for SCP transfers (default: flash:).
  • enable_password (eos) - Password required to enter privileged exec (enable) (default: '').
  • force_no_enable (ios, nxos_ssh) - Do not automatically enter enable-mode on connect (default: False).
  • global_delay_factor (ios, nxos_ssh) - Allow for additional delay in command execution (default: 1).
  • ignore_warning (junos) - Allows to set ignore_warning when loading configuration to avoid exceptions via junos-pyez. (default: False).
  • keepalive (iosxr, junos) - SSH keepalive interval, in seconds (default: 30 seconds).
  • key_file (ios, iosxr_netconf, iosxr, junos, nxos_ssh) - Path to a private key file. (default: False).
  • port (eos, ios, iosxr_netconf, iosxr, junos, nxos, nxos_ssh) - Allows you to specify a port other than the default.
  • secret (ios, nxos_ssh) - Password required to enter privileged exec (enable) (default: '').
  • ssh_config_file (ios, iosxr, junos, nxos_ssh) - File name of OpenSSH configuration file.
  • ssh_strict (ios, iosxr, nxos_ssh) - Automatically reject unknown SSH host keys (default: False, which means unknown SSH host keys will be accepted).
  • ssl_verify (nxos) - Requests argument, enable the SSL certificates verification. See requests ssl-cert-verification for valid values (default: None equivalent to False).
  • transport (eos, ios, nxos) - Protocol to connect with (see The transport argument for more information).
  • use_keys (ios, iosxr, nxos_ssh) - Paramiko argument, enable searching for discoverable private key files in ~/.ssh/ (default: False).
  • eos_autoComplete (eos) - Allows to set autoComplete when running commands. (default: None equivalent to False)
  • config_encoding (iosxr_netconf) - Set encoding to either "xml" or "cli" for configuration load methods. (default: "cli")
  • eos_fn0039_config (eos) - Transform old style configuration to the new style, available beginning with EOS release 4.23.0, as per FN 0039. Beware that enabling this option will change the configuration you’re loading through NAPALM. Default: False (won’t change your configuration commands). .. versionadded:: 3.0.1
  • force_cfg_session_invalid (eos) - Force the config_session to be cleared in case of issues, like discard_config failure. (default: False)

The transport argument

Certain drivers support providing an alternate transport in the optional_args, overriding the default protocol to connect with. Allowed transports are therefore device/library dependant:

_ EOS NXOS IOS
Default https https ssh
Supported http, https, ssh http, https telnet, ssh